Sandbak Specifications

Run Your Flat Stock Finishing Lines with One Operator

Sanbak Conveyor

Online Quote Request

Additional Features

  • Heavy-Duty Frame — machine is built to last
  • Adjustable jack legs with casters for easy machine placement.
  • Two-Inch Roller Spacing — Return small parts without additional attachment.
  • Teflon-Lined Steel Slides — Move parts easily and are very durable.
  • Variable-Speed Rollers — Roller speed can match speed of processing machine.
  • Max Drive System insures a lifetime of low maintenance machine operation.
  • Remote control puts control of the conveyor at the operator’s fingertips.
  • Custom sizes available for any machine size or part size.
  • Automatic Speed Control — A turn of the knob instantly adjusts roller speed.
  • Urethane Infeed Roller helps pull parts from processing machine.

Urethane Transfer Belts

Urethane transfer belts move parts easily.

Adjustable Jack Legs with Casters

MaxDrive 2
The MaxDrive system consists of a series of pulleys and rubber belts
which drive the rollers from underneath. There are no urethane bands to weld.

Standard Specifications

  • Frame — Heavy-Duty 2″ welded square tubing with adjustable jack legs & casters.
  • 3-Phase Motor with remote control and variable speed (0-120 FPM)
  • MaxDrive — Powered rollers driven from underneath by a series of pulleys and belts.
  • Two-inch roller spacing
  • Steel Rollers with PVC Sleeve


  • Urethane-covered rollers
  • Programmable Logic Controller
  • Automatic Speed Controller
  • LED Roller Speed Readout
  • Ball Transfer
  • Expandable Bridge
  • Urethane transfer belts
  • Teflon-lined steel slides on receiver
  • Adjustable height from 34″ to 40″
  • Voltage & Amp Requirements:
    460 Volts 3 Phase 60 Hertz 6 Amps
    230 Volts 3 Phase 60 Hertz 10 Amps
  • Horsepower:
    1 HP (up to 20 ft of Powered Return)
    2 HP (more than 20 ft of Powered Return)
  • Air Requirements:
    60lbs @ 10CFM

Machine Operation

  1. Photo Eye detects trailing edge of part.
  2. Receiver Infeed Section lowers onto cross belts which move part laterally to return side.
  3. Part is returned to operator while Receiver Infeed Section raises to repeat cycle.