CutBak for Saws

• Photo eye detects the trailing edge of parts coming from a machine. This causes the receiver rollers to lower.
• Urethane belts move the parts sideways to the return section.
• After the part leaves the receiver section, the rollers raise and the cycle is repeated.

• Powered feed roller guides parts onto the receiver.
• Acetal (plastic) chains transfer parts form the receiver section to the return section.
• The process is continuous, so parts may be butt-fed!
• Available in two versions:

  • S.P. Stripper Plate for Return Only
  • T.R. Thru Roller for Pass-Thru Ability

• Photo eye detects the trailing edge of parts coming from a machine. This causes the receiver rollers to lower.
• Urethane belts move parts from the receiver section to the return.
• After the part leaves the receiver section, the rollers raise and the cycle is repeated.

• Powered roller and infeed arm guide parts onto the receiver.
• A slip clutch matches processing speed then accelerates parts on the conveyor.
• Urethane belts move the parts from the receiver section to the return section.
• Parts may be butt-fed, since the process is continuous

• Photo Eye detects trailing edge of part.
• Receiver Infeed Section lowers onto crossbelts which move part laterally to return side.
• Part is returned to operator while Receiver Infeed Section raises to repeat cycle.

• Economical design ideal for the smaller operation or standardized parts.
• In-feed hold down to insure complete part acceptance.
• Durable, heavy duty steel construction.
• Adjustable in-feed to match most any machine.
• Adjustable jack legs to match most any machine height.
• Close belt spacing to aid in the transfer of smaller parts
• Available with part turning attachment.
• Available in several sizes to fit your application.